Tascam iXR - 7 - Standalone Mode; Overview; Settings in standalone mode

16
TASCAM iXR
7 – Standalone Mode
Overview
•
This unit will operate in standalone mode when it is on and
data is not being transmitted by USB to and from an iOS
device/computer.
•
You can use this unit as a mic preamp and to monitor input
signals. This function is convenient when you want to
practice an instrument without recording, for example.
•
When operating in standalone mode, the USB indicator will
blink.
Settings in standalone mode
The Settings Panel will be set as follows when in standalone
mode.
•
Direct Monitor Settings Input 1-2: Last setting is retained
•
Audio Input On/Off: All on
•
Line Outputs 1/L-2/R: MONITOR
•
ERP2 Setting On/Off: Last setting is retained