To Next PageTo Next Page
Need help?Do you have a question about the Tascam US-122 and is the answer not in the manual?
General| Input Channels | 2 |
|---|---|
| Output Channels | 2 |
| Sample Rate | 44.1kHz, 48kHz |
| Bit Depth | 16-bit |
| Mic Preamps | 2 |
| Phantom Power | Yes |
| MIDI I/O | Yes |
| USB | USB 1.1 |
| Driver | ASIO, WDM |
| Type | Audio Interface |
| Input Connectors | XLR, 1/4" TRS |
| Output Connectors | 1/4" TRS |
| Compatibility | Windows, Mac |
| Channels | 2 |
General introduction to the US-122 USB audio/MIDI interface and its capabilities.
Details the key audio and MIDI interface features of the US-122 unit.
Lists all items included in the US-122 product package.
Information regarding copyrights, trademarks, and legal notices.
Explains conventions for displaying controls and software elements in the manual.
Identifies and describes controls and indicators on the top panel of the US-122.
Details the connectors and ports located on the rear panel of the US-122.
Explains the various input and output jacks on the front panel of the US-122.
Outlines the minimum and recommended system specifications for PC and Mac.
Instructions for installing the US-122 on Mac OS systems.
Step-by-step guide for installing the US-122 drivers on Windows.
Specific installation steps for Windows 2000 and XP operating systems.
Guide for using the Windows New Hardware Wizard for US-122 installation.
Details for installing the US-122 on Macintosh computers.
Configuration steps for Open Music System (OMS) on pre-OS X Macs.
Tips for optimizing PC performance for audio applications.
Important considerations for connecting and using USB devices with the US-122.
Guide on connecting microphones, line-level, and guitar sources to the US-122.
Instructions for connecting MIDI keyboards and other devices to the US-122.
How to use the direct monitoring feature to reduce latency.
Overview of the main settings and status information in the control panel.
How to adjust buffer size for optimal latency and stability.
Options for optimizing USB performance, including disabling audio.
Explanation of the built-in chromatic tuner feature.
Steps to select the US-122 as the audio device in applications like Cubasis.
Using the Audio Control Panel within Cubasis VST for setup.
Configuring sample rate and bit depth for audio streams.
How to enable specific input channels for recording in Cubasis.
Enabling direct monitoring via ASIO 2 for low-latency performance.
Initial setup steps for using the US-122 with Cubasis.
Process of recording audio tracks using Cubasis and the US-122.
How to record additional tracks layered over existing ones.
Configuring Sound Manager for older Mac OS versions.
Setting audio input/output using the Sound control panel in MacOS 9.0.
Configuring audio input/output in MacOS 8.6 Sound control panel.
Setting audio input/output devices and options in Mac OS X.
Configuring sample rate and bit depth for Mac OS X audio.
Common troubleshooting steps for Windows installation and operation.
Ways to contact TASCAM for technical assistance.
Information to gather before contacting technical support.
Frequently asked questions and their solutions for common issues.
Detailed technical specifications for audio input and output levels and impedances.
Technical data on signal-to-noise ratio, dynamic range, and distortion.
Specifications for digital audio conversion, sampling, and MIDI.
Dimensions, weight, and power requirements of the US-122.
Visual diagram showing the physical dimensions of the US-122.
