Need help?Do you have a question about the Tascam US-800 and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Channels | 8 |
| A/D Resolution | 24-bit/96kHz |
| Phantom Power | Yes |
| MIDI I/O | Yes |
| USB | USB 2.0 |
Covers essential safety precautions, cautions, and symbol explanations for device usage.
Details US-specific FCC rules, compliance statements, and conformity declarations for the unit.
Outlines the main features and lists the components included in the US-800 package.
Explains notation, trademarks, installation, and handling cautions for the unit.
Details the controls, jacks, and indicators on the front panel of the US-800.
Describes the various input and output connectors located on the rear panel of the US-800.
Lists the necessary operating systems, computer hardware, and memory for using the US-800.
Step-by-step instructions for installing the US-800 driver and control panel software on Windows and Mac.
Procedures for removing the US-800 driver from Windows XP, Vista, 7, and Mac OS X.
Addresses common installation questions and provides tips for improving computer performance.
Information on setting up the included Cubase LE 5 music production software.
Explains the function of the control panel and details the available menus and settings for Windows and Mac.
Describes the Mixer tab, including faders, pan sliders, mute/solo buttons, and master faders.
Details the operation of pan sliders, mute/solo buttons, and stereo link buttons within the mixer.
Covers the Output tab, detailing output selectors and faders for LINE OUT, PHONES, and DIGITAL OUT.
Explains latency settings, clock source, sample rate, driver, and firmware versions.
Guides on connecting the unit via USB and various analog audio inputs like microphones and guitars.
Details connections for line-level devices, digital devices, monitor speakers, and headphones.
Explains how to connect MIDI devices and handle S/PDIF digital audio signals.
Explains how the digital mixer provides very low latency monitoring for instruments and playback.
Provides a step-by-step guide to mixing guitar input with computer playback for headphone monitoring.
Instructions for setting up the included Cubase LE 5 DAW with the US-800.
Guides on configuring Windows Media Player to use the US-800 for audio output.
Instructions for configuring iTunes and Mac OS X's Audio MIDI Setup for the US-800.
Explains standalone operation and details the fixed mixer, output, and sample rate settings.
A table detailing MIDI messages transmitted and received by the US-800.
Solutions for when the unit fails to install or is not recognized by the computer.
Troubleshooting steps for when no sound is heard during audio playback on Windows and Mac.
Addresses issues like audio breakup and noise, suggesting performance optimization techniques.
Details AD/DA converter specs, analog/digital inputs, outputs, and control I/O specifications.
Lists audio performance metrics, computer system requirements for Windows and Macintosh.
Provides dimensional drawings and a block diagram illustrating the US-800's audio flow.
To Next Page
