Tascam US-800 - Mac OS X iTunes Setup

28 TASCAM US-800
4 Click “ OK .”
5 Start Windows Media Player, select an
audio file and begin playback.
NOTE
If you change this setting while Windows
•
Media Player is running, the software will not
recognize that the device has been changed.
In this case, restart Windows Media Player.
If you still cannot hear sound after making
•
the setting and completing the procedures
above, restart the computer.
After making this setting, sound will be
•
output through this unit, but no sound will
be output by the computer’s speakers or
headphone jacks.
Mac OS X and iTunes
1 Open the “ U tilitie s ” folder, which is
inside the “ Applications ” folder, and
double-click “ Audio MIDI Setup ” to
launch it.
2 Control-click the “ US-800 ”. Check “ use
this device for sound input ” and
“ use this device for sound output ”.
This moves microphone icon and
speaker icon to “ US-800 .”
3 Launch iTunes, select an audio file and
start playback.
7 – Application guide