Need help?Do you have a question about the Tascam US-2000 and is the answer not in the manual?
General| Brand | Tascam |
|---|---|
| Model | US-2000 |
| Category | Accessories |
| Language | English |
Details electromagnetic environment and peak inrush current for CE compliance.
Highlights the audio interface's key capabilities and specifications.
Lists all accessories and components provided with the US-2000 unit.
Explains the manual's conventions and how to use it for reference.
Lists registered trademarks of TASCAM and other companies.
Provides guidelines on operating temperature, ventilation, and avoiding heat sources.
Advises on preventing condensation and how to clean the unit safely.
Details the controls, jacks, and indicators on the front of the US-2000.
Describes the various input/output jacks and connectors on the rear of the US-2000.
Lists the necessary hardware and OS specifications for using the US-2000.
Step-by-step guide for installing the TASCAM US-2000 driver software on Windows.
Procedures for installing the US-2000 driver on macOS systems.
Instructions for removing the US-2000 driver from Windows and macOS.
Answers common questions regarding driver installation and setup issues.
Tips for optimizing computer performance for audio applications with the US-2000.
Guidance on installing the bundled Cubase LE4 music production software.
Introduces the US-2000 Control Panel and its location on Windows and Mac.
Explains how to adjust buffer size for latency and audio stability.
Details how to select the clock source for digital audio synchronization.
How to set the digital output to AES/EBU or S/PDIF.
Selects which line output pairs are routed to the digital output.
Illustrates how to connect various audio devices to the US-2000.
Instructions for connecting the US-2000 to a computer via USB.
General guidance on connecting microphones, instruments, and other audio sources.
Connecting microphones to XLR and MIC/INST IN jacks, including +48V phantom power.
How to connect a guitar to the MIC/INST IN jacks.
Connecting keyboards, drum machines, etc., to LINE IN jacks.
Connecting digital devices via S/PDIF or AES/EBU to DIGITAL IN/OUT jacks.
Connecting powered speakers or amplifiers to MONITOR OUTPUT jacks.
Connecting headphones to the PHONES jack.
Configuring Windows Media Player and system audio settings for the US-2000.
Setting up Audio MIDI Setup for iTunes playback with the US-2000.
Refers to the Cubase LE4 Quick Start Guide for software details.
Details required information for TASCAM customer support.
Addresses problems with driver installation or computer recognition of the unit.
Troubleshooting steps for when there is no audio playback through the unit.
Explains causes of audio glitches and methods to reduce computer load.
Tips for optimizing computer performance for audio processing on Windows and Mac.
States TASCAM does not support Cubase LE4, directing users to Steinberg resources.
Detailed electrical specifications for all analog and digital input/output connectors.
Output power and impedance details for the headphone jack.
Technical details for the S/PDIF and AES/EBU digital input/output jacks.
Specifications for the USB connection type and format.
Frequency response, signal-to-noise ratio, and THD for audio processing.
Lists the required computer hardware and OS for Windows and Mac.
Details compatible computer systems for Windows and Macintosh platforms.
Includes sampling frequency, bit rate, power, dimensions, weight, and operating temperature.
Lists the software included with the US-2000 unit.
Provides physical dimensions and mounting information for the US-2000.
Visual representation of the internal signal flow and component connections.
Illustrates signal levels and gain stages throughout the US-2000's circuitry.
To Next Page
