Need help?Do you have a question about the Tascam US-122MKII and is the answer not in the manual?
General| Audio Interface Type | USB Audio Interface |
|---|---|
| Number of Mic Preamps | 2 |
| Phantom Power | Yes |
| Analog Outputs | 2 x RCA |
| MIDI I/O | Yes |
| Sample Rate | 44.1 kHz, 48 kHz |
| Bit Depth | 24-bit |
| Bus Powered | Yes |
| Software Included | Cubase LE |
| Analog Inputs | 2 x XLR/TRS combo |
| Headphone Output | 1 |
FCC compliance and safety regulations for the US market.
General guidelines for safe operation and handling.
Caution against unauthorized modifications to the equipment.
General description of the US-122MKII audio/MIDI interface.
Key specifications and capabilities of the US-122MKII.
Guidance for users unfamiliar with basic computer operations.
Explanation of text formatting and symbols used in the manual.
List of registered trademarks and company names.
Guidelines for safe and optimal placement and operation of the unit.
Instructions to prevent damage from condensation after temperature changes.
Proper methods for cleaning the unit's exterior.
Detailed explanation of the top panel's buttons, knobs, and indicators.
Description of the front panel's input/output jacks and switches.
Explanation of the rear panel's USB, MIDI, and output connectors.
Hardware and OS specifications needed for the US-122MKII.
Step-by-step guide for installing the driver on Windows.
Guide for installing the driver on Mac OS X.
Procedures for removing the driver on Windows and Mac OS X.
Answers to common questions regarding driver installation.
Tips for optimizing computer performance for audio applications.
Guidance on installing the bundled Cubase LE4 software.
Introduction to the US-122MKII Control Panel and its sections.
Description of the Status and Setting sections of the Control Panel.
Explanation of buffer size adjustment for latency and audio quality.
How to connect the US-122MKII to a computer via USB.
How to connect microphones (XLR) to the unit, including phantom power.
Connecting mics, guitars, keyboards, and other audio sources.
How to connect a guitar to the LINE/GUITAR IN jack.
Connecting line-level audio sources like keyboards or CD players.
Connecting speakers to the LINE OUT jacks on the rear panel.
Connecting headphones to the PHONES jack on the front panel.
Connecting an analog record player via a phono amp.
Connecting MIDI devices to the MIDI IN/OUT ports.
Configuring Windows Media Player for audio output via the US-122MKII.
Configuring Windows Media Player for audio output on Windows Vista.
Setting up audio output for iTunes on Mac OS X.
Guidance for configuring Cubase LE4 for use with the unit.
Solutions for problems during or after driver installation.
Steps to resolve issues with no audio output from the unit.
Configuring sound settings for Windows Vista and Mac OS X.
Methods to fix audio distortion, pops, and noise issues.
Adjusting system settings for optimal audio performance.
Information regarding support for the bundled Cubase LE4 software.
Detailed electrical specifications for audio inputs and outputs.
Specifications for MIDI and USB connectivity.
Technical details on frequency response, SNR, and distortion.
Detailed OS and hardware requirements for Windows and Mac.
Sampling rates, bit depth, and other general technical details.
Details on power supply, consumption, dimensions, weight, and operating temperature.
Information about the included Cubase LE4 software.
To Next Page
