Need help?Do you have a question about the Tascam US-100 and is the answer not in the manual?
General| Internal | No |
|---|---|
| Audio quality | 16 bit |
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 2.0 channels |
| Audio A/D Converter (ADC) | 16-bit/48kHz |
| Line-out Signal-to-Noise Ratio (SNR) | 90 dB |
| Volume control | Rotary |
| Audio formats supported | WAV |
| Firewire (IEEE 1394) ports | 0 |
| Compatible operating systems | Windows XP, Vista Mac OS X 10 |
| Line-in | Yes |
| Headphone outputs | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Compatibility | PC |
| LED indicators | Power, Status |
Weight and Dimensions| Depth | 127.7 mm |
|---|---|
| Width | 150 mm |
| Height | 40.6 mm |
| Weight | 530 g |
Details the controls, indicators, and connectors located on the front of the TASCAM US-100.
Details the connectors and switches located on the rear of the TASCAM US-100.
Explains how to connect the TASCAM US-100 to a computer using a USB cable.
Instructions on connecting microphones to the TASCAM US-100 via XLR or TRS connectors.
Troubleshooting steps for audio dropouts or noise issues on the TASCAM US-100.
Resolving issues where MIC or LINE/PHONO input is not working.
Troubleshooting no sound output from speakers connected to the OUTPUT jacks.
Detailed technical specifications for all input and output connectors.
Technical performance metrics such as frequency response and noise level.
To Next Page
