Need help?Do you have a question about the Tascam US-366 and is the answer not in the manual?
General| A/D Resolution | 24-bit/96kHz |
|---|---|
| Microphone Preamps | 2 |
| MIDI I/O | Yes |
| USB | USB 2.0 |
| Compatibility | Windows, Mac |
| Audio Interface Type | USB |
| Phantom Power | Yes |
| Inputs | 2 x XLR/TRS combo, 2 x TRS, 1 x RCA (stereo) |
| Outputs | 2 x TRS, 1 x RCA |
| Software | Cubase LE |
Adjusting built-in mixer settings and selecting dynamics effects.
How to assign dynamics effects to specific input channels.
How to adjust stereo panning and volume levels for each channel.
Enabling and adjusting the reverb send effect and its master levels.
Details on adjusting parameters for dynamics and send effects.
In-depth explanations for Compressor, Noise Suppressor, and De-Esser effects.
In-depth explanations for Exciter, Equalizer, and Reverb effects.
Procedures for resetting mixer and effect settings to factory defaults.
Steps to resolve issues with driver installation or unit recognition.
Solutions for issues related to no sound output or poor audio quality.
Specific troubleshooting steps for Mac OS X and sound-related problems.
To Next Page
