US-122
CD Installation
Below are the detailed and complete CD installation instructions for
the Tascam US-122 for Windows XP. These instructions are to be
followed if the user is unable to install with the instructions provided
with the US-122
BEFORE YOU BEGIN,
MAKE SURE THE US122 IS NOT PLUGGED IN
DO NOT PLUG IN YOUR US122 UNTIL YOU ARE INSTRUCTED TO.
TURN OFF YOUR ANTI VIRUS
(1A)
IF YOU HAVE PRECIOUSLY ATTEMPTED TO INSTALL THE US-122
PERFORM A CLEAN UNINSTALL BEFORE PROCEEDING.
The US122 Clean Uninstall document can be found on your CD with in the
Application notes or Documentation folder, English, CleanWin2k_Eng.
Please note that the instructions in that document direct you to the /WINNT folder
for Windows 2K. This folder is named /WINDOWS in XP.
Load the US122 CD-ROM into the CD drive.
Wait a few seconds and a window will appear.
Select Open folder to view files using Windows explorer.
Double-click on Drivers or Drivers Installers.
Double-click on “US122_Win2K_Install_3_06.exe”. note: the Version number
might change
It will have a computer and boxes for an icon.
A "Windows Logo testing warning" screen may appear.
If so, click on CONTINUE ANYWAY.
The “Welcome” screen will appear.
Follow the Closing of Programs instruction if it is applicable to your situation.
Click on NEXT.
The “Read me Information” screen will appear.
Click on NEXT.
To Next Page
Need help?
General
