Need help?Do you have a question about the Tascam M-3500 series and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 32 |
| Busses | 8 |
| Aux Sends | 6 |
| EQ | 4-band |
| Insert Points | On all input channels, subgroups, and stereo master |
| Phantom Power | +48V (switchable per channel) |
Essential safety guidelines for operating the M-3500 console, covering usage and environment.
Explanation of how capital letters are used for labels and controls within the manual.
Identifies the three fundamental functions of mixer controls: input, output, and gain.
Explains how to read block diagrams to understand signal flow within the console.
Illustrates the internal signal flow and component connections of the mixer.
Step-by-step guide for setting up and testing the console's functionality.
Procedures for routing signals and setting up cue mixes for multitrack recording.
Steps for combining recorded tracks into a final stereo mix.
Explains the use and function of the console's 4-band equalizer and HPF.
Guidance on setting optimal signal levels for clean audio and preventing distortion.
Detailed explanation of each control and connector on the input channels.
Comprehensive guide to controls found in the console's master section.
Description of front panel controls, including headphone jack and talkback mic.
Information on optional stands for supporting the console.
Details on cables used for inserting signal processors into the signal path.
Description of optional units to expand the console's metering capabilities.
Information on an optional kit for balancing audio signals.
Details on an optional headphone distribution amplifier.
To Next Page
