Need help?Do you have a question about the Tascam M-300 Series and is the answer not in the manual?
General| Outputs | 4 Main, 2 Monitor, 2 Aux |
|---|---|
| Type | Analog Mixer |
| Bus System | 4-Bus |
| EQ | 3-Band |
| Phantom Power | Yes |
| Dimensions | Varies by model |
| Weight | Varies by model |
Explains the mixer's system architecture and subsystems for flexible applications.
Details all controls and functions of a single input channel strip.
Covers program outputs, master faders, and rear panel connections.
Explains VU meters, peak LEDs, and monitor section controls.
Details master controls for AUX, EFFECT sends, and stereo/mono masters.
Lists and describes SUB IN, EXT SOLO, SENSE, and TAPE IN connectors.
Guide to using the mixer for live sound mixing with connection examples.
Steps for multitrack recording using the mixer's buses.
How to use the mixer for audio in video production workflows.
Procedures for calibration, EQ usage, and general mixing tips.
Procedures to verify nominal output levels for master and channel controls.
Tests for channel faders, trim, EQ, AUX, and effect send controls.
Verifies monitor, effect return, PGM/tape, aux, talkback, and performance specs.
Visual breakdown of mixer components and their part numbers.
Detailed lists of components on various printed circuit boards.
Introduction to the schematic section, including wiring and block diagrams.
Schematics showing interconnections between mixer sections for each model.
Detailed circuit diagrams for each major PCB module.
Internal block diagrams of integrated circuits and system blocks.
To Next Page
