Need help?Do you have a question about the Tascam M-16 and is the answer not in the manual?
Introduces block diagrams for understanding signal flow and gain.
Explains the switch for selecting MIC, LINE, or TAPE input sources.
Guides through checking signal routing for recording.
Details setting up a 16 track cue system using AUX 3/4.
Explains channel assign switches and the main pan pot.
Details the solo system logic and additional controls.
Explains the switch for selecting monitor source.
Details the AUX 3 and AUX 4 circuits for cueing.
Explains the NORM/REMIX switch for SOLO logic.
Details the stereo master faders and their stereo operation.
Outlines a recommended setup for 16 track recording.
Details an 8 track setup including monitor effects.
Lists input/output impedance, levels, and connections.
Procedure for checking LINE IN to ACCESS SEND signal level.
Procedure for checking LINE IN to DIRECT OUT signal level.
General| Channels | 16 |
|---|---|
| Faders | 16 |
| Phantom Power | Yes |
| Aux Sends | 4 |
| EQ | 3-band |
| Type | Analog Mixer |
| Inputs | 16 (XLR/TRS combo) |
To Next Page
