What to do if computer does not recognize Tascam Music Mixer via USB?
If your computer isn't recognizing the Tascam Music Mixer when connected via USB, ensure you're using a USB 2.0 or USB 3.0 port, as the unit isn't compatible with USB 1.1. Avoid using a USB hub; instead, connect the mixer directly to a USB port on your computer. If the issue persists, try connecting the unit to a different USB port.
How to fix Bluetooth connection issues with Tascam Music Mixer?
If you can't connect to or are experiencing interrupted communication with a Bluetooth device using your Tascam Music Mixer, first ensure that the Bluetooth device is powered on and its Bluetooth function is enabled. Check that the Bluetooth device isn't too far away from the mixer and that there are no obstructions like walls. Try repositioning the mixer and the Bluetooth device. If problems persist, try turning the mixer off and on again. As a last resort, remove the “TASCAM Mixcast 4” pairing record from the Bluetooth device.
Why can't I pair my Tascam Music Mixer with a Bluetooth device?
If you're unable to pair your Tascam Music Mixer with another Bluetooth device, first, make sure the other Bluetooth device supports A2DP. Confirm that the device is in a state that allows transmission. Try turning off and on both the mixer and the Bluetooth device, then attempt pairing again. Turn off any other Bluetooth devices nearby that you're not trying to pair with. Finally, remove the “TASCAM Mixcast 4” pairing record from the other Bluetooth device.
Why is my Tascam Music Mixer not recording?
If your Tascam Music Mixer is not recording, first ensure that the SD card has sufficient free space. Also, note that recording will become impossible once the podcast name reaches “PODCAST_999”.
How to fix distorted sound when recording with Tascam Music Mixer?
If the sound you're trying to record with the Tascam Music Mixer is distorted, first, ensure the input levels of all channels are appropriate and that the input source levels aren't too high. Also, verify that the Voice Setting for each input is suitable for your recording. Next, check that the channel faders and the MONITOR OUT knob aren't set too high. Finally, consider whether the monitoring level is excessively high, causing distortion in the monitoring system itself.
Why is there noise coming from my Tascam Music Mixer?
If you are experiencing noise issues with your Tascam Music Mixer, check the connection cables for any contact problems. If the unit is close to devices like TVs, radios, or power amplifiers with large transformers, move it away to reduce potential interference. Keep wireless LAN, Bluetooth devices, and microwave ovens at a distance. For Bluetooth connections, minimize the distance between the mixer and the Bluetooth device and adjust their positions. If using a smartphone, ensure only the music playback app is running to prevent sound breakup.
Why does the Tascam Music Mixer sound break up when connected via USB?
If you're experiencing sound breakup or noise when your Tascam Music Mixer is connected via USB, it might be due to the computer's processing load. To resolve this, disable any wireless LAN connections or background software, including antivirus programs, while using the mixer. For Windows users, set the PC Control Panel 'Power Options' to 'High performance'. Also, ensure you're using the included USB cable and connecting directly to a USB port on your computer, avoiding USB hubs.
How to troubleshoot no sound output from Tascam Music Mixer?
If you're not getting any sound output from your Tascam Music Mixer, make sure that the MONITOR OUT and/or PHONES knobs and the faders are raised to suitable levels. Check if any of the channel SOLO or MUTE buttons are engaged. Ensure that microphones and other audio sources are correctly connected to the input jacks. Verify that the input level settings and audio source settings are correct, and that the monitoring system is correctly connected to the MONITOR OUT or LINE OUT jacks and properly set up.
What to do if Tascam Music Mixer does not recognize SD card?
If the SD card is not being recognized by your Tascam Music Mixer, first, ensure that the SD card is fully inserted. Verify that the SD card is supported by the unit. Confirm that the SD card is properly formatted; back up any necessary data and reformat the card. If the unit stops responding after inserting the SD card, remove and re-insert the card to reset the connection.
Why does my Tascam Music Mixer have noise or sound dropouts?
If the Tascam Music Mixer is experiencing noise or sound dropouts, it may be due to excessive CPU load on the connected computer. Try basic countermeasures to reduce CPU usage.
General| Number of Mic Inputs | 4 |
|---|---|
| Number of Headphone Outputs | 4 |
| USB Audio Interface | Yes |
| Bluetooth Connectivity | Yes |
| Recording Format | WAV |
| Channels | 14 |
| Inputs - Mic Preamps | 4 |
| SD Card Slot | Yes |
| Battery Operation | No |
| Power Supply | AC Adapter |
| Type | Podcast Station |
| Phantom Power | Yes (+48V) |
| Outputs - Main | 2 (L/R) |
| USB | 1 x USB Type-C |
| EQ Bands | 3-band |
| Effects | Reverb |
| Storage | SD/SDHC/SDXC card (up to 512GB) |
| Sampling Rate | 44.1kHz |
| Power | 12V DC |
| Weight | 5.73 lbs |
| Built-in Sound Pads | Yes, 8 customizable sound pads |
To Next Page
