Tascam MP-VT1 - Formatting the unit quickly; Formatting the unit completely

TASCAM MP-VT1 23
Use QUICK FORMAT to format the MP-VT1’s flash memory
quickly. Formatting the unit erases all files on the unit,
but the MUSIC and UTILITY folders and the mp-gt1.
sys files are automatically regenerated.
1 Select QUICK FORMAT and press the ENTER key to
highlight Exec.
2 Press the ENTER key again to open a confirmation
popup window.
3 Press the ENTER key again to format the
unit quickly.
Press the MENU key to cancel formatting.
Use FULL FORMAT to format the MP-VT1’s flash memory
completely. Unlike QUICK FORMAT, FULL FORMAT also checks
the memory for errors. For this reason, it takes much
more time. Formatting the unit erases all files on the
unit, but the MUSIC and UTILITY folders and the
mp-gt1.sys files are automatically regenerated.
1 Select FULL FORMAT and press the ENTER key to
highlight Exec.
2 Press the ENTER key again to open a confirmation
popup window.
3 Press the ENTER key again to format the
unit fully.
Press the MENU key to cancel formatting.
Formatting the unit quickly
Formatting the unit completely
9 – Setup Menu Options
WARNING
Using QUICK FORMAT or FULL FORMAT erases the MANUAL
folder and the pdf Owner’s Manual in it. Please
make a copy of this file before formatting the unit.
CAUTION
When using QUICK FORMAT or FULL FORMAT, use the AC
adapter (sold separately) or confirm that the battery
is sufficiently charged. If the power fails during
formatting, the formatting may not occur correctly.