Tascam MP-VT1 - 13 Recycling the Battery; How to Remove the Rechargeable Battery

28 TASCAM MP-VT1
13 – Recycling the Battery
This unit uses a lithium ion battery. Lithium ion
batteries are a valuable, recyclable resource. Before
disposing of this unit, please remove and recycle its
battery.
How to remove the rechargeable battery
Before removing the battery, turn the unit power switch
ON and drain the battery until it ceases to function. (Set
the AUTO OFF function to OFF. See “Automatic power off”
on page 22.)
WARNING
NEVER TAKE THE UNIT APART FOR ANY
PURPOSE OTHER THAN TO REMOVE THE
BATTERY BEFORE DISPOSAL!
Li-ion
1 Remove the four side screws and remove the
upper case.
2 Remove the battery from the unit and detach the
connector.