Tascam TSR-8 - Installation Guidelines; Unpacking and Initial Inspection; Recommended Installation Environment

Installations
aS
ASIST
TS
1.
UNPACKING
AND
INSPECTION
——-——____—___—--__—-0['"9\""
During
unpacking,
be
careful
not
to
damage
the
After
unpacking,
give
the
machine
a
complete
visual
TSR-8.
Save
the
carton
and
packing
material
as
well;
inspection.
If
there
is
any
evidence
of
damage
due
to
you
may
need
them
to
transport
your
TSR-8
sometime
rough
handling
during
transport,
it
is
your
responsibility
in
the
future.
to
notify
the
carrier
and
submit
a
claim.
Box with Empty Reel
Manual
Side Packing Material
2. INSTALLATION SITE
The
TSR-8
may
be
used
in
most
areas,
but
to
main-
3)
Strong
magnetic
fields
should
not
exist
nearby.
tain top performance and prolong operating life, observe
the following environmental limitations:
1) Nominal temperature should be 5 to 35 degrees
C (41 to 95 degrees F).
2) Relative humidity should be 30 to 90% (non-
condensing).