15
Cleaning method
Direct method:
Scrubbing and Vacuuming in one pass.
Indirect working method:
Scrubbing and vacuuming in several passes.
Cleaning methods are described in detail in the "Method Card". You can obtain
"Method Cards" from your TASKI partner or representative.
Refilling the solution tank
When the tools are no longer sufficiently fed by the solution, the tank containing the
solution is empty.
End of operation
After cleaning
Caution:
Do not clean without solution, as it could cause floor damage.
t Stop cleaning.
t Empty or refill the machine again (page
10/19).
t Stop the flow of solution.
t Drive a further few metres to avoid subsequent
,,dripping’’.
Very important when using contact pads!
To Next Page
Loading...
Need help?
General