19
Emptying solution
Disposal of solution must by in accordance with the national regulations.
t Take off the air suction filter and clean it if necessary
(page 7).
t After the tank is emptied and rinsed, close the tank.
t Once the tank is empty, put back the red cap and refix
the hose to its fittings.
t Turn off the machine (main switch).
t Remove the tank cover closing.
t Take off the tank cover/dosing cup.
t Take off the hose (blue cap) from its fittings.
t Unscrew the blue cap.
Open the cap at the height of the handle and lower the hose end slowly to
pour out the soiled solution.
t Conduct the emptying hose to a drain sink or a bucket.
To Next Page
Loading...
Need help?
General