66
-
-
Overdosing or underdosing will lead to unsatisfactory
cleaning results.
During these 5 minutes:
The battery level indicator provides information on the available oper-
ating time.
• If the red indicator begins to flash, approx. 5 minutes of
residual working time are left.
• After that the brush unit is lifted. The red display switches
to continuous light.
• Now 10 more minutes remain for driving the machine to the
charging station. Then the machine is automatically
switched off.
• In order to restart, the batteries must be fully charged.
Scrubbing and suction in one work step.
Applying the cleaning solution, scrubbing and suction in several work
steps.
- Optionally available wheels can improve the traction
of the machine on the floor. Please contact your TAS-
KI customer consultant.
• Lower the squeegee.
• Unlock the foot pedal and lower the
tool slowly.
• Switch the machine on.
The indicator elements lights up briefly.
• Press the suction unit ON/OFF but-
ton.
The display lights up; the suction en-
gine starts.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start-
ed when the brushes rotate.
• Use the quantity control to dose the
cleaning solution.
• Pull the switch bracket drive on the
driving handle.
The tool starts to rotate and the
cleaning solution supply starts.
• the brushes may not be manipulated in any way.
• the user must not leave the machine out of sight.
• sucked in or jammed objects may be cleaned from the
squeegee only.
• the user is only allowed to leave the machine in order to
clear the work space. The user must maintain visual con-
tact.
To Next Page
Loading...
