92
I25 I24 I23 I22 I21 I20 I19 I18 I17 I16 tr sv sl pt pl no nl it fr fi es en de da cz
Service, maintenance and care
The maintenance of the machine is the prerequisite for
impeccable operation and a long service life.
Service intervals
TASKI machines are high-quality machines which have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest Diversey service partner is
provided on the last page of this manual.
Blade replacement
Fuse replacement
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will
expire.
Legend:
= each time cleaning is completed, = every week,
= every month, ⊗ = service lamp
Activity
⊗
Page
Loading batteries ● 85
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
● 86
Draining and cleaning the recovery and
fresh water tank
● 91
Check the intake and suction filter for
contaminations and clean them
●
Clean all yellow marked parts ●
Clean the brushes ● 91
Clean the squeegee, check the blades
for wear and change them, if necessary
● 90
Clean the machine with a moist cloth ● 91
Clean the seals of the tank lid, check
them for cracks and replace them, if
necessary
●
Maintenance and service program
carried out by Diversey service
technicians
●
• In order to maintain operational safety and
readiness for use, the machine must be ser-
viced whenever the maintenance indicator
lights up (factory setting is 650 working
hours) or at least once a year.
In case of extraordinary use and/or insufficient
maintenance, shorter intervals are required.
• Undo the four socket screws (1, 2, 3, 4).
• Separate the squeegee body from the squeegee core
(5, 6).
• Remove the blades (7, 8).
• Clean the squeegee body and both squeegee cores under
running water.
• Mount the "turned" or new blades onto the squeegee core.
• Reinsert the squeegee core into the squeegee body.
• Retighten the four socket screws.
• The machine must be switched off.
Caution:
Before opening the battery compartment
make sure that both tank areas are empty.
• Disconnect the battery from the machine.
• On the bottom left front side of the
machines you will find the battery
compartment release.
• Undo the socket screw.
• Carefully tilt the tank backwards until
it is lying on the floor.
Attention:
Use fuses with the specified value only!
Incorrect fuses may damage the machine.
To Next Page
Loading...
Need help?
General