94
I25 I24 I23 I22 I21 I20 I19 I18 I17 I16 tr sv sl pt pl no nl it fr fi es en de da cz
Technical information
Accessories
Error Codes
Error codes are indicated on the display.
Machine XP-R XP-M
Working width 75 75 cm
Squeegee width 95 95 cm
Dimensions (LxWxH) 131 x 95 x 130 131 x 95 x 130 cm
Maximum weight of operational machine 452 438 kg
Rated voltage 24V 24V DC
Rated power, nominal 1150 1100 W
Fresh water tank, nominal 113 113 l
Weighted sound pressure level L
pA
according to ISO 11201 69 69 dB(A)
Weighted effective acceleration value according to ISO 5349-1 <2.5 <2.5 m/s2
Splash water guard IPX3 IPX3
Protection class II II
No. Item XP-R XP-M
7514650 Scrubbing brush, nylon, soft, 45cm 2x
7515725 Scrubbing brush, nylon, hard, 45cm 2x
7515726 Scrubbing brush, nylon, abrasive, 45cm 2x
7514648 Pad drive harpoon grip, 45 cm 2x
7522220 Pad drive harpoon grip, 38 cm 2x
7522221 Scrubbing brush, nylon, 38cm (standard) 2x
7522222 Scrubbing brush, washed concrete, 38 cm 2x
7522223 Scrubbing brush, abrasive, 38 cm 2x
7523342 Scrubbing brush, water saving, 38 cm 2x
4131268 Protection profile x x
4126922 Flash light set xx
7516242 IntelliDose swingo XP x x
8502830 Filling hose with universal coupling x x
Notice:
Switch the machine off and on again
whenever an error code occurs.
Error codes might be remedied by switch-
ing the machine off and on.
Code Description Remedy
E 020 Battery in deep discharge
The battery voltage fell below 20.5V.
Machine requires complete charging cycle.
Contact your service partner
E 041 The current difference between the brush motors is higher than 50% for 15 sec.
The brush unit is lifted.
Switch off the machine and let it cool down.
Contact your service partner
E 048 Short circuit detection or overload condition (e.g. blocked wheels or brushes).
Traction motor, brush motor or suction motor is switched off.
Contact your service partner
E 051 Incorrect parameters
The parameter checksum is incorrect.
Contact your service partner