Taski swingobot 1650 CE

Questions and Answers

M
Mary RichardsAug 10, 2025
What to do if Taski swingobot 1650 CE Floor Machine is leaving water?
- L
  Lauren HernandezAug 11, 2025
  If your Taski Floor Machine is leaving water, it could be due to a few reasons. First, the water flow might be set too high; try lowering the water valve setting in the settings menu. Another potential cause is a dirty squeegee. In this case, wipe the squeegee with a rag or flip/replace the squeegee blade. Note that the blade can be flipped up to three times before needing a replacement.
A
Anthony CoxAug 17, 2025
Why Taski swingobot 1650 CE Floor Machine is not working?
- R
  Rachel BrooksAug 17, 2025
  If your Taski Floor Machine isn't functioning, there are several possible causes: * The charger might be plugged into the robot. Unplug it. * The battery pack may not be correctly engaged. Push the battery pack into place. * The battery might not be charged. Load the batteries.
V
Valerie BurgessAug 23, 2025
How to fix Taski Floor Machine that is not cleaning floor surface?
- S
  Samantha GonzalezAug 23, 2025
  If your Taski Floor Machine isn't cleaning the floor surface, it might be because the brush motor isn't running. Try resetting the circuit breaker. Also, verify that there are no obstacles trapped in the brush head.
M
Mary TaylorAug 28, 2025
Why does Taski swingobot 1650 CE have navigation issues?
- K
  Kathleen GarciaAug 28, 2025
  If your Taski Floor Machine is experiencing navigation issues, the sonar might be faulty. Perform a sonar diagnostic and clean the sonar. Another possibility is mechanical drag; inspect the casters.
V
Valerie BooneSep 3, 2025
What to do if Taski swingobot 1650 CE is pulling to one side when manually driving?
- P
  Pam MaddenSep 4, 2025
  If the Taski Floor Machine pulls to one side during manual driving, the parking brake may not be fully disengaged. Move the parking brake lever all the way to the left, then all the way back to the right.