Why does my Tatung TICT-1502MW stop heating during cooking?
If your Tatung Cooktop stops heating suddenly, it may be due to the self-safety protection activating. This can occur if the oil temperature is too high when frying, the surrounding temperature is very high, the air inlet or outlet is blocked, or the default heating time has elapsed. To resolve this, wait a few minutes, then reconnect the power to resume use.
What to do if my Tatung TICT-1502MW Cooktop shows error E7 E8?
If your Tatung Cooktop displays error codes E7 or E8, turn off the hotplate. Once the voltage returns to normal, turn the hotplate back on. It should then operate as usual.
What to do if my Tatung TICT-1502MW shows error E3 E6?
If your Tatung Cooktop displays error codes E3 or E6, wait a moment for the hotplate temperature to normalize. Then, press the “ON/STANDBY” button. The cooktop should then operate normally.
Why Tatung TICT-1502MW Cooktop display is on but not heating?
If your Tatung Cooktop's “ON/STANDBY” indicator lights up and the display works, but heating doesn't start, check if the cookware you are using is suitable for the cooktop. Also, verify that the appliance is not in a “Preset” working status. For other potential causes, it's recommended to have the appliance inspected and repaired at an authorized service center.
How to fix Tatung TICT-1502MW that won't turn on?
If your Tatung Cooktop isn't turning on, check the power plug to ensure it's properly connected. Inspect the switch, power outlet, fuse, and power cord for any signs of damage.
Essential safety rules for using electrical appliances, covering hot surfaces, liquids, supervision, and cord handling.
Information on FCC compliance, radio frequency energy, and specific warnings related to power supply cords and extension cords.
Prohibits certain uses like sealed containers, empty pots, incorrect cookware, and placement near hazards.
Covers electrical shock prevention, cord safety, pacemakers, and physical handling to avoid injury.
Details on proper power outlets, avoiding damage, keeping the cooker clean, and placement considerations.
Guidelines for use by children and individuals with reduced capabilities, emphasizing supervision and safe operation.
Details the induction cooker's capabilities, performance parameters, and a visual map of its components.
Explains the control panel functions and initial steps before operating the induction cooker.
Guides the user through connecting the power supply and turning the induction cooker on.
Details how to use various functions, set the timer, and switch off the appliance.
Instructions for cleaning the cooker plate and ventilation openings, emphasizing unplugging and cooling.
Methods for removing oil spots and advice on storing the appliance when not in use.
Lists common operational issues and provides key checking points and troubleshooting steps.
Explains specific error codes and advises on immediate actions and contacting support for failures.
To Next Page
General