TAWI CR80 - Page 2

2
Declaration of Conformity
According to 2006/42/EG Annex IIA
This manual and the Declaration of conformity is only valid when using TAWI authorised tools.
Manufacturer
TAWI AB
Box 10205, Transportgatan 1, 434 23 Kungsbacka, Sweden
Authorised representative
Name:
Company:
Address:
Machine description
Product group:
TAWI Lifting Trolleys
Product type:
CR80
Serial number:
It is hereby conrmed that the machine mentioned is in compliance with the following directives:
• 2006/42/EG Machine Directive
• 2014/30/EU EMC Directive
The following harmonised standards have been used:
• 12100:2010 Safety of machinery - General principles for design - Risk
assessment and risk reduction
• SS-EN 349+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of
parts of the human body
• SS-ISO 22915-16:2015 Industrial trucks - Verification of stability - Part 16:
Pedestrian-propelled trucks
• SS-EN ISO 3691-5:2015 Industrial trucks. Safety requirements and verification. Part 5:
Pedestrian-propelled trucks
• SS-EN 12895:2015 Industrial trucks - Electromagnetic compatibility
• SS-EN 1175-1+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1:
General requirements for battery powered trucks
• SS-EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1:
General principles for design)
• SS-EN 60204-1 Safety of machinery – Electrical equipment of machines – Part 1:
General requirements
Notied body:
Inspecta
Date:
Place:
Kungsbacka, SWEDEN
Signature:
Thomas Bräutigam, CEO TAWI Holding
Signature:
David Ranfalk, Responsible for the technical dossier
Manual CR80 GB update 2019.indd 2 2019-09-11 14:18:42