TAWI CR80 - Page 3

3
Declaration of Incorporation of Partly Completed Machinery
According to 2006/42/EG Annex IIB
A nal certication is required before sending the lifter to an end customer.
Manufacturer
TAWI AB, Box 10205, Transportgatan 1, 434 23 Kungsbacka, Sweden
Authorised representative
Name:
Company:
Address:
Machine description
Product group: TAWI Lifting Trolleys
Product type:
CR80
Serial number:
It is hereby conrmed that the machine mentioned is in compliance with the following directives:
• 2006/42/EG Machine Directive
• 2014/30/EU EMC Directive
The following harmonised standards have been used:
• 12100:2010 Safety of machinery - General principles for design - Risk assessment and
risk reduction
• SS-EN 349+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the
human body
• SS-EN ISO 3691-5:2015 Industrial trucks. Safety requirements and verification. Part 5: Pedestrian-
propelled trucks
• SS-EN 12895:2015 Industrial trucks - Electromagnetic compatibility
• SS-EN 1175-1+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General
requirements for battery powered trucks
• SS-EN ISO13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1:
General principles for design
• SS-EN 60204-1 Safety of machinery – Electrical equipment of machines – Part 1:
General requirements
Notied body:
Inspecta
Date:
Place:
Kungsbacka, SWEDEN
Signature:
Thomas Bräutigam, CEO TAWI Holding
Signature:
David Ranfalk, Responsible for the technical dossier
Important
When receiving a Declaration of Incorporation of Partly Completed Machinery according to 2006/42/EG Annex IIB,
a final certification according to 2006/42/EG Annex IIA is required before the lifter can be sent to an end customer.
The main part of this is to make sure that the lifter complies to
SS-ISO 22915-16:2015 Industrial trucks -
Verification of stability - Part 16: Pedestrian-propelled trucks
and to perform a risk analysis.
Manual CR80 GB update 2019.indd 3 2019-09-11 14:18:42