Tip: Hold down the “+C/F” or
“-PMCE/RCC” buttons to advance the dig-
its quickly.
Daylight Savings Time – to turn DST
on, press “MODE” until “OFF” appears in
the clock digits. Press and hold the
“SET/AL” button until it switches to “ON”.
DST is now on. Press “MODE” to return
to the clock display.
How to Set the Alarm
Your WeatherGuide™ has 2 separate alarm settings.
To set one alarm:
1.Press the“MODE” button on the back of
the base unit.The unit will beep.The clock
time changes to the alarm time. “A1” ap-
pears next to the time.
8
Press Mode, then press and
hold SET/AL, then press Mode
to change DST.
Press SET/AL after choosing
12/24 hour time.
Clock is set
Press MODE to start alarm
setting
A1
To Next Page
Loading...
