Need help?Do you have a question about the Taylor 1542 and is the answer not in the manual?
General| Type | Digital Thermometer |
|---|---|
| Display | LCD |
| Material | Stainless Steel |
| Auto Power Off | Yes |
| Resolution | 0.1°F/°C |
| Temperature Range | -40 to 450°F / -40 to 232°C |
| Accuracy | ±2°F (±1°C) |
Details base station functions like RF temperature monitoring, highest/lowest readings, alarm clock, and calendar.
Outlines remote sensor capabilities including transmission frequency, range, and temperature tolerance.
Step-by-step guide for installing batteries and pairing the remote sensor with the base station.
Procedure for registering a remote sensor when the RF signal icon is not visible.
Guidance on locating the base station and remote sensor for best performance and transmission.
How to switch between 12-hour and 24-hour time displays.
Instructions for setting the current time, date, and year.
Method to view the calendar display on the device.
Procedure for setting up Alarm 1 and Alarm 2.
How to activate, silence, or snooze alarms.
Viewing and clearing recorded minimum and maximum temperatures.
Programming high/low temperature alerts for indoor and outdoor readings.
Instructions for setting, starting, pausing, and resetting the countdown timer.
Procedure to reset the thermometer to its original factory settings.
Information on ordering extra remote sensors and contact details.
Details regarding compliance with FCC rules and potential interference.
Overview of the product's one-year limited warranty and service contact.
To Next Page
