The sensor wire is not included with the unit and can be purchased separately by contacting
Taylor Customer Service at 1-866-843-3905.
OPERATING INSTRUCTIONS
12/24 Hour Clock Selection
In the normal time display mode, press the DOWN 12/24 button to display the time in 12 hour or 24
hour format. (In 12 hour format AM or PM will show at the left of the time).
Setting Time and Date
Note: When setting the current time or alarm time, press and hold the UP or DOWN button for fast
setting.
• Press the SET button for 2-3 seconds until the hour is flashing.
• Press UP or DOWN to set the hour.
• Press SET and the minutes will be flashing.
• Press UP or DOWN to set the minutes.
• Press SET and the month will be flashing.
• Press UP or DOWN to set the month.
• Press SET and the date will be flashing.
• Press UP or DOWN to set the date.
• Press SET and the year will be flashing.
• Press UP or DOWN to set the year.
• Press SET to lock in the settings and return to the normal time display.
• If no buttons are pressed within 20 seconds, the unit will revert to the normal time display.
• In any setting mode you can press the CHANNEL button to revert to the normal time display.
Note: Use the MODE button to scroll through the various displays. Starting from the normal time
display, press MODE to view alarm time 1, alarm time 2, countdown timer, return to normal time. If
the display is in any mode other than normal time and no buttons are pushed, within 20 seconds the
LCD display will revert to the normal time display.
Display the Calendar
In normal display mode, press the SET button once to display the time with seconds, press SET again
to display the date, press SET again to return to the normal time display.
Setting the Alarm Time
Two different alarm times can be set, Alarm 1 and Alarm 2.
• To set Alarm 1; In normal time mode, press the MODE button once and the Alarm 1 time and
icon (A1) will show.
• Press the SET button for 2-3 seconds until the alarm hour flashes.
• Press UP or DOWN to set the alarm hour.
• Press SET and the minutes will be flashing.
• Press UP or DOWN to set the alarm minutes.
• Press SET to return to normal time display.
• To set Alarm 2; In normal time mode, press MODE twice and the Alarm 2 time and icon (A2)
will show.
• Follow the same setting sequence as for Alarm 1.
Activating the alarm
To Next Page
Loading...
