Taylor 1743 User Manual

9
SILENCING THE ALARM
While the alarm is sounding, press any button except the “SNZ” button or press and
hold the “SNZ” button for 3 seconds to silence the alarm.
SNOOZE FUNCTION
While the alarm is sounding, press the “SNZ” button once to activate the snooze
function. The alarm sounds again after the snooze time has passed.
In snooze mode, press any button except the “SNZ” button or press and hold the “SNZ”
button for 3 seconds to exit snooze mode.
NOTE: If the snooze function is set to OFF while the alarm is sounding, pressing “SNZ”
will not activate the snooze function.
MAXIMUM/MINIMUM TEMPERATURE/RELATIVE HUMIDITY
To toggle between indoor/outdoor maximum, minimum temperature and humidity
data…
Press the “MEM” button once to show the maximum temperature and humidity values.
Press the “MEM” button twice to show the minimum temperature and humidity values.
Press the “MEM” button three times to return to the current temperature and humidity
levels.
To reset the maximum and minimum temperature and humidity, press and hold the
“MEM” button for 2 seconds. This will reset all minimum and maximum data recorded to
the current displayed values.
NOTE: If the temperature reading is below range, “LL.L” will be displayed. If the
temperature reading is above range, “HH.H” will be displayed.
LOW BATTERY INDICATOR
If the battery icon “ ” appears in the “IN” column, replace the Base Station battery.
If the battery icon “ ” appears in the “OUT” column, confirm which channel is
prompting the low battery warning and replace the corresponding Wireless Outdoor
Sensor battery.

Taylor 1743 Specifications

General

Brand	Taylor
Model	1743
Category	Weather Station
Language	English