Taylor 810 Series - Page 22

1-18
INTRODUCTION
Model 810, 812, 820, 822, 828 Series
Introduction
1
L820, G820 Specifications (Continued)
Figure 1-6
FIGURES IN BRACKETS INDICATE MILLIMETERS / DECIMAL AND FRACTIONAL DIMENSIONS EQUAL TO ( PLUS OR MINUS 1/16 IN. [1.5 MM])
MACHINE HEIGHT CAN VARY ( PLUS OR MINUS 2.5 IN. [63.5 MM] ) WITH CastER HEIGHT ADJUSTMENT / SIDE GREASE CANS NOT SHOWN.