Taylor 810 Series - Page 95

PARTS
4-23
Model 810, 812, 820, 822, 828 Series
Parts
4
Platen A.-Service - X73730-23 (C810, C812) Parts Identification
*Not Included in X73730-23
Item Description Part No.
*1 Cover A.-Platen X73256
*2 Screw-10-32X1/2 SLTD TRUS 037734
3 Insulation-CER FBR 073255
4 Shield-Heat 073260
5 Shield-Coupling Rear 072927
6 Shield-Plate Shroud 072465
7 O-ring-1-3/16 OD X .103W 052733-120
8 Shield-Plate Shroud- Outer 072466
9 Shroud A.-Platen X72835
10 Sealant-Gore-Tex R700033
11 Cable-Platen-F-Rear 073251
12 Kit A.-ADJ REPL (See page 4-31) X74232-SER
13 Screw-12-24X1/2 Torx Drive 058720
Item Description Part No.
14 Washer-1/4 EXT. Tooth LOC 000656
15 Kit A.-ADJ REPL (See page 4-32) X74233-SER
16 Thermocouple-K Type SS Braid 079622
17 Control-Limit w/Screws 078721
18 Screw-8-32X5/16 SLTD Round 017552
19 Cable-Platen-Front 073252
20 O-ring-1-1/16 OD X 0.103 W 052733-118
21 Shield-Plate Tube 072467
22 Shield-Coupling Front 072926
23 Screw-10-32X7/16 065717
24 Shield-Plate Tube Inner 072467-1