Section 9C
Section 9C
TransmiTransmission ssion ControlsControls
shift lever and an automatic powershift controlshift lever and an automatic powershift control
module. module. The APC The APC module interfaces module interfaces with thewith the
Taylor Integrated Control System’s MD3 module,Taylor Integrated Control System’s MD3 module,
that is located in the instrument panel, to automat-that is located in the instrument panel, to automat-
ically shift the transmission.ically shift the transmission.
Before servicing truck, parkBefore servicing truck, park
the truck on level ground, apply parking brakethe truck on level ground, apply parking brake
and block the wheels in both directions.and block the wheels in both directions.
TICS Pin Code.TICS Pin Code. Certain transmission controlCertain transmission control
functions can only be changed in the TICS systemfunctions can only be changed in the TICS system
by entering a by entering a Pin Code. Pin Code. The Pin Code The Pin Code is uniqueis unique
to each truck and is provided to the person desig-to each truck and is provided to the person desig-
nated bynated by the purchaserthe purchaser of theof the vehicle.vehicle. The pinThe pin
To Next Page
Loading...
