TX / TXH / TXB 180S - 400L (Rev. 4/23/07)TX / TXH / TXB 180S - 400L (Rev. 4/23/07)
9C-149C-14
Display Test and Display Test and VerVersionsion
When selecting this group, the display shows:When selecting this group, the display shows:
When pressing the S switch (F4), the display changes to:When pressing the S switch (F4), the display changes to:
Releasing the switch engages a scrolling text display that shows the part number and the version.Releasing the switch engages a scrolling text display that shows the part number and the version.
When pressing the S switch (F4), the display switches back to the display test mode, showing:When pressing the S switch (F4), the display switches back to the display test mode, showing:
Followed by the program identification string (e.g. ECON C 1.5 r6).Followed by the program identification string (e.g. ECON C 1.5 r6).
After releasing the After releasing the S switch (F4), the S switch (F4), the display again illuminates all display again illuminates all segments.segments.
Digital Input TestDigital Input Test
When selecting this group, the display shows:When selecting this group, the display shows:
The display shows which inputThe display shows which inputs are active. s are active. Each segment of the display Each segment of the display indicates a specific logical indicates a specific logical input.input.
Different segments cDifferent segments can be switched on simultaneously if difan be switched on simultaneously if different inputs are activated simultaneously. ferent inputs are activated simultaneously. InIn
total there are fourteen inputs: total there are fourteen inputs: ten digital and four analog inputs (in ten digital and four analog inputs (in this group treated as if tthis group treated as if they werehey were
digitaldigital pull to groundpull to ground inputs)inputs)
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
