Need help?Do you have a question about the TBB Energier Pro CF3090L and is the answer not in the manual?
General| Rated Power | 3000W |
|---|---|
| DC Input Voltage | 24V |
| AC Output Voltage | 230V |
| AC Output Frequency | 50Hz |
| Surge Power | 6000W |
| Battery Voltage Range | 21-30V |
| Max. Charging Current | 60A |
| Operating Temperature | -10°C to 50°C |
| Peak Power | 6000W |
| Output Voltage | 230V |
| Frequency | 50Hz |
| Efficiency | 93% |
| USB Output | 5V/2.1A |
| Cooling | Fan |
| Communication | RS485, CAN |
| Protection | Overload, Short Circuit, Over Temperature |
Details essential safety precautions for qualified personnel and manual reading.
Covers safety measures when working with batteries, including acid contact and flammable gases.
Details the charger's features like powerful charging, multi-stage algorithm, and temperature compensation.
Provides a chart for configuring various modes like Weak Grid, Solar, LVD, Battery Type, EQ, PS, GEN using DIP switches.
Provides essential advice on DC voltage, proximity to batteries, and AC source connection.
Step-by-step guide for connecting battery, slave charger, and AC cables correctly.
Ensures correct DC voltage, polarity, and AC connections before powering on the unit.
Details on switching the unit on, off, and the resulting LED indications for inverter/charger status.
Describes Bulk, Absorption, and Floating charging stages and their corresponding LED indicators.
A comprehensive table detailing LED status and audible alarms for various functions and faults.
Identifies common issues like no output, no charging, and mode switching with their causes and solutions.
To Next Page
