Main Board revision
Since the Tango 2 startet there have been some improvements as the community requested it. You can
identify the board version by opening the Tango 2 and look for the print below the speaker connector or by
looking in the Crossfire Lua/ Crossfire Tx/ About
● V1 - About page version
1.01
, PCB label
V006G
○ Initial release, 250mW max power, no module bay connector
● V2 - About page version
1.2
, PCB label
V006H
○ 250mW max power, moule bay connector
● V3 - About page version
2.0
, PCB label
V007A or later
○ 1W max power, module bay connector
● V4 - About page version
2.2
, PCB label
V007c or later
○ Same as v3, minor changes
To Next Page
Loading...
