Multi module bay adon
As requested by the community we now include the option for a mini-module bay add-on. To use this
module bay you need your tango 2 to be on hardware revision 2 or later (which version do I own?).
You can get the stick-on module bay including the required parts at the TBS shop. Follow the steps in the
picture below. This is an easy task and can be done within 10 minutes easily.
Important note:
The FrSky XJT mini module does NOT work with the Tango 2! The Multi-Protocol-Modules that are available
work fine (status 10/2020). The JR-bay version does work without any issues.
In the next few weeks you can get MPM from TBS which will give you the highest available output power.
To Next Page
Loading...
