10
THE M•ONE DISPLAY
Analog/Digital
Analog/Digital indicator states the chosen
Input.
This choice is done in the "I/O Setup" menu.
The Input choice is global
Icons: Analog, Digital
Sample Rate
The Sample Rate indicator shows the clock
source and the incoming master clock.
These can be: Digi In, 44.1kHz, 48kHz.
Example
• When locked to an external digital signal,
the indicator will display: Digi In and 44.1.
• While using analog Inputs and the internal
clock will display: 44.1.
In case of no clock or unacceptable clock, the
Digital In icon will be blinking indicating the
error situation. The Sample Rate choice is
global.
Routing Fig and text
Shows the current Routing.
Options are: Dual Send/Return, Parallel/Serial,
True Stereo and Dual Mono.
Algo Indicator
Shows the running algorithm in each of the
two Engines. Push any of the EDIT keys to
scroll through the available effect algorithms.
Select between:
Rev, Dly, Cho, Fla, Pit, EQ, Dyn, Trm and Pha.
Dynamic Meters
These two meters are used to show the gain
reduction when one of the Engines is running
a dynamic algorithm. Dynamic algorithms are:
Compressor, Limiter, Gate,
De-esser and Expander.
Preset Number
The current preset number.
Edited
This icon will be lit as soon as the current
preset has been modified.
Factory/User
Shows whether you are operating in the
Factory or User bank.
MIDI In
Indicates the presence of incoming MIDI data.
Text Line
This 20 character text line is used to display
preset names as well as selected functions.
To Next Page
Loading...
Need help?
General
