TC Electronic M-ONE XL User Manual

15
In the Stereo Linked Routing the Engines
perform the exact same effect with
synchronized parameter settings.
Left I/O are used for Engine 1, Right I/O are
used for Engine 2. When switching to Stereo
Linked Routing the Engine 1 settings are
forced into Engine 2.
EFFECT
BAL.
Controls the balance between the two Engine’s
FX Outputs.
MIX
Controls the amount of dry signal passed
around the two Engines. Dry signal is passed
in stereo.
The Stereo Linked routing can be
used for a true stereo application.
Example:
Select the Compressor and insert the M•ONE
on a sub- group on your mixing console. Now
you have a true stereo compressor with
identical settings, and you only have to edit
one Engine to change the settings of both
channels.
In the Dual Mono routing, the two Engines are
totally independent, meaning mono in/mono
out of each Engine.
Left I/O are used for Engine 1, Right I/O are
used for Engine 2.
EFFECT
BAL.
Controls the balance between the two Engine’s
FX Outputs.
MIX
Controls the amount of dry signal passed
around the two Engines. Dry signal is passed
independently for the two channels.
Dual Mono is a great routing for
independent Mono use. This
enables you to use the two Engines
for two totally different purposes.
Example:
You need a Tremolo and an EQ for inserting
on two different channels.
Connect the first channel to Left In/Out of the
M•ONE, and the second channel to right
In/Out, select the Tremolo and the EQ, and
you are up and running.
Stereo Linked Dual Mono
ROUTINGS
L
L
R
R
STEREO LINKED
MIX
FX BAL
ENG1
ENG2
M•ONE
MIXER
L
STEREO R
RETURNSSEND
DUALEFFECTS PROCESSOR
MIXER
1
2
INSERTS
M•ONE
DUALEFFECTS PROCESSOR
L
L
R
R
DUAL MONO
MIX
FX BAL
ENG1
ENG2

TC Electronic M-ONE XL Specifications

General

Brand	TC Electronic
Model	M-ONE XL
Category	Recording Equipment
Language	English