EasyManuals Logo

TC Electronic M2000 User Manual

TC Electronic M2000
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
35
GLOSSARY
AES/EBU
Professional digital in/out standard, using balanced XLR cables.
S/PDIF
Consumer digital in/out standard, normally using coaxial phono-
type cables.
DITHERING
Dithering is a method to optimize the quality of a digital audio
signal at low levels. A small amount of filtered noise is added to
the signal, giving you a less distorted low level signal.
If you are using digital outputs, the equipment you feed deter-
mines the number of bits. A DAT recorder should always be
dithered to 16 bit.
PROF/CONS LEVELS
Depending on which equipment you are using along with the
M2000, you must set the PRO/CON parameters correctly in the
I/O setup menu.
M2000 Analog Inputs:
Consumer range: -16dB to +10dB, nominal level = -10dB
Professional range: -6dB to +16dB, nominal level = +4dB
M2000 Analog Outputs:
Consumer range: -10dB to +16dB
Professional range: -16dB to +6dB
The levels are either listed in the technical specifications or
printed on the rear panel of the connected devices.
DE’ESSING
An algorithm that removes unwanted »esses« from a vocal mate-
rial.
SYSTEM EXCLUSIVE MIDI COMMANDS
Device-dependent MIDI commands, normally used for remote
controlling machines.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TC Electronic M2000 and is the answer not in the manual?

TC Electronic M2000 Specifications

General IconGeneral
BrandTC Electronic
ModelM2000
CategoryRecording Equipment
LanguageEnglish

Related product manuals