15
Setup - Output
Output – Sets the way VoiceLive Play outputs sound via the XLR or headphone
outputs.
There are 2 settings:
1. STEREO – XLR and Headphone outputs receive a stereo mix of all voices and other inputs.
2. MONO – A MONO full-mix signal is on the LEFT and a DRY vocal is on the RIGHT. Any Tone
and Pitch Cor Amt settings from the Setup menu are included on the RIGHT DRY channel.
Vocal Cancel – Attempts to remove the vocals from a piece of music.
There are two settings:
1. OFF – No processing is performed on the aux input.
2. ON – Processing occurs to attempt to remove lead vocals from a piece of music. This pro
cess can create “Karaoke” style music for you to sing along to, including key information for
harmony generation. The processing capability can vary quite a bit from song to song, depend-
ing on the way the song was originally mixed.
Lead Mute – Mutes the Lead vocal and only outputs processed signals.
There are two settings:
1. OFF – Lead vocals are routed to the main mix.
2. ON – Lead vocals are removed from the main mix.
Digital Out Level – Controls the USB output level.
Headphone Lim – Controls the level at which the headphone output limiter engages.
Levels closer to 0db allow for louder headphone output levels.
To Next Page
Loading...
