TC-Helicon VoiceTone D1 - Using the Mic Control Feature; Tips for Avoiding Feedback

2.InstallVoiceSupportonyourcomputer.
3. Connect your product via USB to your computer.
4.RunVoiceSupport.
5. Read the news, click on tabs and browse the features of the application.
Using the Mic Control Feature
MicControlallowsyoutoturneffectsonandofffromtheoptionalTC-HeliconMP-75microphone.
PushtheMICCONTROLswitchintoallowremoteon/offcontrolonanyorallpedalsinachain.When
Mic Control is not desired, ensure the switch is out. Using multiple pedals requires the control signal
pass through featuretobeenabledonallbutthelastpedal.Toenableordisablethisfeature,holdthe
effect footswitch and the switch on the mic for 3 seconds.
Tips for Avoiding Feedback
• Ensureyourmonitorand/orPAspeakersdon’taimdirectlyatthefrontofyourmic
• Singclosetothemic,eventouchingthegrillwithyourlips
• Tryasuper-cardioiddynamicmicsuchasTC-Helicon’sMP-70andMP-75
• SetyourPAchannelEQandgraphicEQflat
• Haveyourbandplayquieteronstage.