TC-Helicon VoiceTone Harmony-M - Step 5: Set Control Knobs Position; Step 6: Connect Power Adapter

8
Step 5:
Set the Input Knob fully left then set the Humanize, FX
and Harmony control knobs to the detent at the 12
O’Clock position.
Step 6:
Connect Harmony-M's power adapter to main power
and to the Power Input on Harmony-M. There is no
power switch so plugging it in automatically turns it on.
Quick Start
Input
Tone
Humanize FX Harmony
Preset
Hall
Room
Echo
Higher
High
Low
3
Mic input Output Footswitch
Power
MIDI in