Need help?Do you have a question about the TC-Helicon VoiceTone Harmony-G and is the answer not in the manual?
Analog Inputs| mic input impedance | 1 kOhm |
|---|---|
| mic input sensitivity at 0dBFS | -44 dBu to +2 dBu |
| mic input sensitivity at 12dB headroom | -56 dBu to -10 dBu |
| guitar input impedance | 1 MOhm |
| guitar input sensitivity | +15 dBu at 0dBFS |
| equivalent input noise | -126 dBu at max. mic amp gain, Rg = 150 Ohm |
Analog Outputs| main output impedance | 40 Ohm |
|---|---|
| main output level | +2 dBu at 0dBFS |
| guitar thru output impedance | 270 Ohm |
Input to Output Analog Audio Performance| dynamic range, mic at min gain | >108 dB, 20 Hz - 20 kHz A-weighted |
|---|---|
| dynamic range, mic at -18 dBu sensitivity | >104 dB, 20 Hz - 20 kHz |
| thd+ noise, mic at min gain | <-90 dB |
| frequency response at max gain | -1.5 dB at 40 Hz, +0/-0.3 dB (200 Hz to 20 kHz) |
| guitar in to thru dynamic range | >119 dB |
| tuning mute attenuation | >100 dB |
Conversion Characteristics| sample rate | 48 kHz |
|---|---|
| converter | AKM AK4620B |
| ad / da conversion | 24 bit, 128x oversampling |
Operating Environment| operating temperature | 32 °F to 122 °F (0 °C to 50 °C) |
|---|---|
| storage temperature | -22 °F to 167 °F (-30 °C to 70 °C) |
| humidity | Max. 90 % non-condensing |
Weight and Dimensions| dimensions | 130 mm x 132 mm x 41 mm (5" x 5.25" x 1.5") |
|---|---|
| weight | 1.5 lb (0.72 kg) |
Using fixed key harmonies independent of guitar input.
Browsing additional sound options for existing FX styles.
Restoring all settings to their original factory defaults.
Adjusting the reference pitch for harmonies.
Common problems and solutions for guitar not changing harmonies.
Adjusting guitar volume when singing.
Troubleshooting steps when the guitar signal isn't heard.
Ensuring FX are active and not set to Off.
Engaging Bypass/Tuner mode for no FX.
Finding help and contact information on the website.
How to disable harmony voices within a preset.
Details on Mic and Guitar input impedance, sensitivity, and EIN.
Details on main output impedance, level, and Guitar Thru output.
Dynamic range, THD+Noise, frequency response, and tuning mute attenuation.
Sample rate, converter type, and oversampling bitstream.
Compliance with safety and electromagnetic standards.
Operating and storage temperature and humidity limits.
Product dimensions, weight, and warranty information.
To Next Page