Name: TC-Helicon VoiceTone Harmony-G
Brand: TC-Helicon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Loading Presets

Press the Preset button to load the next preset and

change the sound. If you need to access your two

favorite sounds while standing, tapping the A/B

footswitch will toggle between them quickly.

If you would like to access more presets while standing,

hold the A/B footswitch to enter Preset select mode.

Now, pressing the A/B button cycles through the five “A”

preset settings or “B” preset settings, depending on

whether an A or B was loaded when you held the

footswitch.

Making Harmonies

Play a song on your guitar and sing. Press the On

footswitch to hear the harmony voices in the preset you

have loaded. Press the On footswitch again to mute the

harmony voices so you can sing with no harmony.

Using the Tone Button

When you activate the Tone button, your voice will

sound smoother and brighter. There are three high

quality studio effects that accomplish this: adaptive

“Shape” EQ, adaptive compression, and de-essing.

Mixing

The three control knobs: Guitar, FX and Harmony, adjust

how much guitar, vocal harmony and FX are added to

your lead voice.The balance you create will be the same

for all presets. The factory-set levels at the center

position have been programmed for optimum sound.

Adjusting the Harmony Level

Turn the Harmony control to raise or lower the amount

of harmony added to your voice. If the Double button is

on, the extra voice it adds will be adjusted as well.

Changing the FX Volume

Turn the FX control knob to raise or lower the mix level

of the effect style selected with the FX button.

Getting to Know Harmony-G

Questions and Answers:

Need help?

Do you have a question about the TC-Helicon VoiceTone Harmony-G and is the answer not in the manual?

TC-Helicon VoiceTone Harmony-G Specifications

Analog Inputs

mic input impedance	1 kOhm
mic input sensitivity at 0dBFS	-44 dBu to +2 dBu
mic input sensitivity at 12dB headroom	-56 dBu to -10 dBu
guitar input impedance	1 MOhm
guitar input sensitivity	+15 dBu at 0dBFS
equivalent input noise	-126 dBu at max. mic amp gain, Rg = 150 Ohm

Analog Outputs

main output impedance	40 Ohm
main output level	+2 dBu at 0dBFS
guitar thru output impedance	270 Ohm

Input to Output Analog Audio Performance

dynamic range, mic at min gain	>108 dB, 20 Hz - 20 kHz A-weighted
dynamic range, mic at -18 dBu sensitivity	>104 dB, 20 Hz - 20 kHz
thd+ noise, mic at min gain	<-90 dB
frequency response at max gain	-1.5 dB at 40 Hz, +0/-0.3 dB (200 Hz to 20 kHz)
guitar in to thru dynamic range	>119 dB
tuning mute attenuation	>100 dB

Conversion Characteristics