TCL-THOMSON Electronics R&D Center (Shen’Zhen Lab)
Chassis Name
NX56-LA
Serial No.
Issued on
2008-05-19
Page
Page 11 of 15
Updated on
2010-01-27
Version
2.2
STB=Standby when power on
LAST=Last power off status
EEPROM INIT 0 EEPROM initial 0=>1=Active EEPROM initial
BRI CURVE >>>>>> Brightness curve Adjust this value
CONCURVE >>>>>> Contrast curve Adjust this value
COL CURVE >>>>>> Color curve Adjust this value
VOL CURVE >>>>>> Volume curve Adjust this value
AV STANDB 0
AV no signal within 10
minutes automatic
standby
1 =Enable 0=Disable
DEFALT
LANGUAGE
1
SET DEFALT
LANGUAGE
1=Enlishˈ2 =Portuguese
3= Spanish
DEFALT TUNE
MODE
1 SET DEFALT TUNE
MODE
DEFALT TUNE MODE
0 = cable
1 = antenna
AT ENABLE 1
AT MODE
ENABLE
1 =Enable 0=Disable
VCHIP ENABLE 1
VCHIP
ENABLE
1 =Enable 0=Disable
Description:
1). Set the shopping status
When trigger the “SHOP INIT” item form “0” to “1”, the TV will be put on selling status.
The TV status after shopping status:
A. “FACTORY HOTKEY” had set to “OFF”.
B. Picture set to “Standard” status. (Brightness=50, Contrast=50, Colour=50, White
tone
=Normal.)
C.
Sound set normal.(Volume=30,Balance=50.)
D.
2). Set the user picture and sound curve value
A. Brightness curve:
OSD menu Default Value Description Remark
BRI0 0 Set the minimal brightness when user Brightness=0
BRI50 32 Set the brightness when user Brightness=50
BRI100 63 Set the maximal brightness when user Brightness=0
Set the value as
practical
requirement
B. C
ontrast curve:
OSD menu Default Value Description Remark
CON0 0 Set the minimal contrast when user Contrast=0
CON50 32 Set the contrast when user Contrast=50
CON100 63 Set the maximal contrast when user Contrast=0
Set the value as
practical
requirement
To Next Page
Loading...
Need help?
General
