Page 6 of 18
INSTALLATION
Warning：Before using this unit, please keep it upright for at least 3-4 hours.
This unit can easily be moved from one room to another. While moving the unit
please ensure that it is kept upright and then placed on an even surface.
1. Extend the first 10cm of each side of the hose
2. Screw the hose inlet onto the end of the pipe
3. Screw the hose outlet to the opposite end of the
hose.
4. Put the hose inlet in position on the Air
outlet grille and twist anticlockwise to lock it
into place.
INSTALLATION OF WINDOW KIT
Partially open a window and then fix the window slider kit to the window as shown in the
diagrams below. This method works with most standard sash or vertical sliding windows.
The window kit is not designed to be used with other styles of window, although the kit may
be adapted for use with other windows. Failing this the hose outlet can be used
independently with most windows / doors. The window slider can be placed both
horizontally or vertically, and can be extended to cover the gap. The hose outlet can then
be clipped into the window slider.
To Next Page
Loading...
Need help?
General
