21
Note
• If there is no sound output from the Sound Bar main unit
and the orange LED ashes rapidly, try to activate the
PCM signal output on your TV or device. PCM is used
to convert analog audio signals into digital audio signals
in most devices. For more information of how to activate
the PCM signal output, check the user manual of your
TV or device.
Directions for setting up your Sound Bar using an optical
cable
Do not bend or kink the optical cable (SPDIF) as it is
fragile and can easily get damaged and broken.
To get the best possible audio experience using optical
cable:
1. Press the Home button on your TCL TV Remote.
2. Navigate to Audio option under Settings.
3. Uncheck the “TV speaker enabled” option.
4. Under S/PDIF and ARC, select PCM-Stereo.
Notes
• Different•devices•may•have•different•menu•options.
• Devices•such•as•Blu-ray•players,•set-top•boxes,•etc.•are•
also•applicable.
To Next Page
Loading...
Need help?
General
