TCL Alto 5 - Use your Sound Bar system; Use your Sound Bar with the top panel or remote control

25
Tip
• If you cannot nd the model name TCL Alto 5 on
your Bluetooth device, press and hold /PAIR on
the remote control. You will see the blue LED ashes
rapidly. Now the Sound Bar main unit is entering the
pairing mode.
Your Sound Bar system is now set up and ready to use.
5
To disconnect the Bluetooth function, you can:
• press on the Sound Bar main unit or the source
buttons on the remote control to switch to another
source; or
• disable the Bluetooth function on your device; or
• press and hold /PAIR on the remote control.