3. Directions for Use
3.27 Stereo and Second Audio Program
Multi-channel Sound (MTS) broadcasts
enhance TV viewing by bringing you
programs with high fidelity stereo sound.
MTS also provides an extra channel called
the Second Audio Program (SAP), which
broadcasters can use to transmit a second
language or for other purposed.
Press MTS on the remote control to
select STEREO, MONO, SAP, or
MONO+SAP. All the options will be
available only when the current TV
channel is broadcasting that option.
Channels will not always carry
programs that have all the MTS
If STEREO appears on the screen
when you select a channel, stereo
broadcasting is available with the
current TV program. You can hear
sound from the left and right speakers
of the TV.
If the broadcast is not strong or clear,
stereo sound is not available. Press
the MTS button to change to MONO.
This should eliminate the noise.
If MONO appears on the screen when
you choose a channel, Stereo is not
available.
If SAP appears when you select a
channel, Second Audio Program
broadcasting is available for the
current TV program.
Press the MTS button to choose SAP
and you may hear the program in a
different language or some other
If you choose MONO+SAP by
pressing the MTS button, you will
hear both the Second Audio Program
and the regular MONO (monaural or
single-channel) audio simultaneously.
CATV 6
AUTO
MONO
CATV 22
AUTO
MONO
STEREO
SAP
OR
Colour Television Chassis: M123A
32
To Next Page
Loading...
Need help?
General
