10
Commonly-used status icons are displayed in the web UI, which give you information about
your CPE.
or /
It is the network your CPE connects to. No Service will be displayed
when there is no network available.
The number of the signal bar indicates the signal strength. The more
signal bars it shows, the stronger the signal is.
VoLTE is enabled.
VoLTE is disabled.
The CPE connects to WAN network.
The CPE disconnects from WAN network.
New messages or unread messages.
The SMS inbox is full.
Wi-Fi is enabled.
Wi-Fi is disabled.
Click to log out of the web UI.
Firmware update.
NOTE
• VoLTE function will be disabled if there is no telephone port on your device.
To Next Page
Loading...
